6/9/12/15/18M Outdoor Misting Cooling System with 0.3mm Brass Mist Nozzles Patio Fan Cooler Water Mist Producing Cool Mist in Greenhouse Garden Pool Trampoline Canopy and Porch

Length: 6/9/12/15/18MThe fine forms a nozzle voltex in the guide vane, and a fine hollow mist is sprayed from the orifice.Can be widely used in plant humidification, cooling, disinfection, dust reduction, landscaping, salt spray test and other artificial fog, such nozzles is punched with the US precision drilling machine, the hole diameter is 0.4 mm, well-made, cost and Gas comparison with humidification, it saves 10 times or more.The series of nozzles do not need air assistance, the system is simple, the spray mist is fine, the atomization is sufficient, the energy saving and water saving are low, and the effect is good; the stainless steel spray film is processed by The advanced forging process, and the durability is strong. It is 2.5 times longer than the same type of nozzle.The nozzle can fully utilize the pressure of the tap water for atomization. The use of a high pressure water pump is less effective.Installation Guide1. It is recommended to install the atomization system at a height of 2.5m-3m.2. Connect the adapter to the faucet.3. Turn on the faucet cleaning system for 1 minute to clean the system and remove impurities.4. Screw the discharge nozzle onto the tee fitting except the one at the end.5. Turn on the faucet cleaning system for 2 minutes to ensure the system is completely cleaned.6. Close the water and install the latest nozzle onto the fitting and use the end plug.7. The atomizing pipe is fixed by a cable tie saddle clip provided.8. Turn on the faucet until the sprayer is working and enjoying the cooling atomization system.Packing List6M Kit (black or white ):Brass Nozzle : 6PcsNozzle holder: 6PcsEnd Plug: 1PCPE tube: 6M3/4" Adapter: 1PCFaucet Adapter: 1PCTube Clip: 20 PcsTube Tie: 20 Pcs9M Kit (black or white ):Brass Nozzle : 11PcsNozzle holder: 11PcsEnd Plug: 1PCPE tube: 9M3/4"

• The misting system produce water mist, which absorb the heat from the outdoor surrounding in hot summer,and provides a cooling outdoor areas. The soft mist can be used in trampoline water park, umbrella, shade sail, swimming pool, not only funny but also cooling.
• The nozzle use American precision punching device, The aperture is about 0.3mm, well-made. This series of nozzles does not require air assistance, the system is simple, spray a fine mist, sufficient atomization, has the advantages of energy saving, water saving, low cost and good effect.
• Stainless steel spray sheet is processed by advanced forging technology, strong durability, it has a longer working life.
• The nozzle can be completely atomized by the pressure of the tap water, and the effect of using the high-pressure water pump is better.
• The fine misting nozzles are made of brass bodies, inlayed stainless steel core guide vanes, the liquid forms a centrifugal vortex in the guide vanes, spray tiny open-core type particles from the jet hole, can be widely used in factory humidification, cooling, disinfection, dust fall, landscaping, salt fog test, and other artificial fog.